tascam dr-100 digital audio recorder

By Richard Hernandez   ·   Updated Aug 7, 2012   ·   Print Print

Switching to XLR

Switching to XLR inputs on Tascam DR-100

Set the INPUT switch to XLR.

This will allow recording with an external microphone connected to the recorder with an XLR cable.

Note: here are the other INPUT settings for recording:

- If you want to record with the built-in omni-directional stereo microphones on the top of the recorder, set the INPUT to OMNI

- If you want to record with the built-in directional stereo microphones on the front of the recorder, set the INPUT to UNI

- If you're getting an audio feed from an audio mixer,then sent the INPUT to LINE.

Filed under: Audio